Solar System Design
Power Pak DIY
Power Pak DIY
A Complete Off-Grid System
This new generation Off-Grid product will revolutionize the Alternative energy market.
It can be a Back-up system or by a flick of a switch become a complete off grid system for the home.
It comes pre-assembled and tested with all the appropriate components and wiring needed for an Off-Grid system making it an easy setup up for the DIY’er
Power Pak Complete System
FEATURES & BENEFITS
Mode 1 - UPS
The Power Pak can back up circuits in your home, so when the power goes out, you are protected. No need for a noisy, expensive, fuel consuming generator.
This system is fully configured to switch automatically over to battery power, when the grid goes down. Protect your fridge, freezer, furnace, water pump (if you have one) or a sump pump
Mode 2 - Off-Grid
Switch the system over and you have a complete Off-Grid system. Bring in solar and you are fully functioning.
Two of these units could take a home off the grid.
World wide remote access, (IoT)
Open an app on your phone to verify the status of your Power Pak system. In Mode 1; if the grid power goes down, the Power Pak will message your cell phone and let you know your you are operating on back-up power.
In Mode 2; the system will message your phone when it is low on battery power. You can program the Power Pak to perform specifi c tasks. Like turn on the outside lights before you arrive.
Connect the panels directly to the system, the controller is built inside the unit.
For 12 volt version, you can hook up 2 – 260 watt panels, connect the two in parallel or series.
For 24 volt version, you can connect 4 – 260 watt panels, connect two sets of series panels and parallel these two sets together. Before connecting to the controller.
The cabinet holds 4 batteries.
It comes with two as a starter system.
This will allow you to see how much solar power is being fed into the batteries and the voltage level of the batteries.
Monitor how many watts are being drawn out of the batteries instantaneously, or for the whole weekend.
The size of your system must match your demand. The AC Kilowatt consumption value will inform you if you are using more than expected.
It is important to size your system correctly, so you do not damage the batteries.
3 Kw sine wave at 12 Volts
Canadian Solar Inc. 260 watt
40 amp EP Solar controller
EP Solar MT-50
displays AC volts, watts and Kw consumed
AGM 12 Volt 120 amp-hr rated
30 amp input and 30 amp output
40 amp DC breaker provided